IntelliHose® C-DEF11/1650M

This IntelliHose model is designed to prevent freezing and slushing in DEF lines on Case 1150M and 1650M bulldozer engines.

Like all IntelliHose heated hoses, this model includes:

  • Temperature control based on ThermEvolve® technology.
  • A heating element specifically chosen for optimum performance.
  • Durable insulation.

Find a distributor today and order, or contact us directly to discuss a sample.

 

Specifications and Application Notes

This model's assembly specifications

  • Built for: Case 1150M and 1650M bulldozers.
  • Setpoints: ON at −5°C, OFF at −3°C (23°F, 27°F). (Note: DEF freezes at −11°C or +12°F.)
  • Time to thaw: In-house testing finds DEF within hose warms from −40°F (−40°C) to liquid (ca. 32°F, 0°C) in 3 minutes of full duty power.
  • Hoses: Two EPDM hoses (SAE 20R3EC) with SAE J2440 push-to-connect fittings:
    • A Hose: 3/8" inner diameter, ℓ 10 ft 3 in. (312 cm).
    • B Hose: 5/16" inner diameter, ℓ 10 ft (305 cm).
  • Voltage: 24 V nominal.
  • Current draw: 
    • Full duty 375 mA/ft (1.23 A/m), total 7.5 A.
    • Temperature maintenance: 0.18 duty (total 1.35 A) at −40°F (−40°C). Less at higher temperatures.
  • Wattage: Full duty 9 W/ft (30 W/m), total 182 W.
  • Electrical subsystems: As requested. See the section below on available subsystems.

 

Application Notes

Detailed application notes for IntelliHose products are available at our Application Notes and FAQ page.

 

 

What's New

engenity Products Covered in SOHE

Read SAE Off-Highway Engineering's article about engenity's ThermEvolve technology.

Now available

IntelliThaw PV-400

A ready-to-install heating system for PV-400 crankcase ventilation filters.

Print Print | Sitemap
© 2013–2015 engenity LLC
739 Kasota Avenue SE, Minneapolis, MN
(612) 767-9590